Update Notice - Eco-design Requirements For Lighting Products
Based on the preparatory study to analyse the technical, environmental and economic aspects of lighting products and components, the European Commission have ｕｐｄａｔｅ the ecodesign requirements for lighting products and components.
After the new regulation entry into force, the following Commission Regulation shall be repealed: 1194/2012/EU, 244/2009/EC, 245/2009/EC.
This provision now is under discussion. It shall apply from 1 September 2018. The Commission shall review this Regulation no later than 1 September 2025.
◇ The new eco-design requirements shall apply in accordance with the following stages:
-
Stage 1: 1 September 2018;
-
Stage 2: 1 September 2020;
-
Stage 3: 1 September 2024;
◇ Scope of new provision (brief):
-
This Regulation establishes ecodesign requirements for placing on the market and putting into service of lighting products and lighting product components, including when they are integrated into other products.
◇ Not apply to lighting products and lighting product components, which are specified to operate exclusively in:
-
military or civil defence equipment or installations;
-
nuclear installations;
-
means of transport for persons or goods other than those operated by a stationary motor;
-
road, railway, marine or air traffic signalling;
-
medical devices;
-
laboratory equipment;
-
electronic displays;
-
pieces of art;
-
environments with ambient temperatures below -20°C or above 50°C.
Main changes:
■ For Lighting Products and Lighting Parts:
◇ Energy Efficiency requirements:
|
|
Maximum allowed rated power consumption in full-load mode
|
Maximum allowed rated power consumption in stand-by mode
|
rated power consumption in off-mode
|
|
Stage 1
|
|
Psb = 0.5W
|
there shall be no allowed rated power consumption in off-mode.
|
|
Stage 2
|
|
|
Stage 3
|
|
◇ Functionality Requirements:
|
Requirement depending on Φ
|
Φ ≤ 500lm
|
500lm ≤ Φ ≤ 10klm
|
Φ > 10klm
|
|
Warm-up time
|
twu < 1,5s
|
twu < 40s
or
twu < 100s if it contains mercury in amalgam form
|
twu < 0,5h
|
|
Colour rendering
|
CRI ≥ 80Ra
|
CRI ≥ 0Ra if it is intended for outdoor or industrial applications
or
CRI ≥ 80Ra otherwise
|
CRI ≥ 0Ra
|
|
Power factor
|
PF ≥ 0,55
|
PF ≥ 0,9
|
no requirement
|
|
Colour consistency
|
Variation of chromaticity coordinates within a six-step MacAdam ellipse or less.
|
|
Lumen deterioration
|
Φdet ≤ 1% after accelerated endurance testing
|
|
Failure rate
|
Fr ≤ 10% after accelerated endurance testing
|
|
Flicker
|
IF ≤ 1% after accelerated endurance testing
|
◇ New accelerated endurance testing: the 6000 hours lumen maintenance change to accelerated endurance testing, which consist of three single tests:
-
Test 1: temperature cycling test, the duration of this test is half the model’s rated life-time with a maximum of 1000h.
-
Test 2: high temperature test, the duration of this test is half the model’s rated life-time with a maximum of 1000h.
-
Test 3: switching test, the duration shall be 168h.
■ For auxiliary parts (including transformer, driver, dimmer switch, etc):
|
Energy Efficiency requirements
|
Functional requirements
|
-
The allowed minimum energy efficiency in full-load mode shall be 90%.
-
The maximum allowed rated power consumption in stand-by mode (Psb), if existing, shall be Psb = 0,5W.
-
There shall be no allowed rated power consumption in off-mode.
|
-
Power Factor: PF≥0.9
-
Failure rate: Fr≤10% (after accelerated endurance testing)
|
Intertek Services
-
Intertek has lighting testing experts and state-of-the-art laboratories located in Asia, Europe and North America, helping your products to meet various national and international standards in the shortest delivery time.
-
We provide safety, performance and energy testing service for all kinds of lighting products used for household, commercial, automobile, airports, traffic and railway, etc.
About Intertek
Intertek is a leading Total Quality Assurance provider to industries worldwide. Our network of more than 1,000 laboratories and offices and more than 100 countries, delivers innovative and bespoke Assurance, Testing, Inspection and Certification solutions for our customers’ operations and supply chains. Intertek Total Quality Assurance expertise, delivered consistently with precision, pace and passion, enabling our customers to power ahead safely.
www.intertek.com.cn
中文
